EUROLAB
iso-8124-16-testing-of-small-parts-in-toys
Mechanical and Physical Testing ASTM F1975 Standard Test Method for Toy Sharp EdgesASTM F2853 Standard Test Method for Toy DurabilityASTM F963 Standard Consumer Safety Specification for Toy SafetyASTM F963-00 Toy Sharp Point TestingASTM F963-01 Mechanical Safety Testing of ToysASTM F963-02 Mechanical Strength TestingASTM F963-03 Toy Sharpness TestingASTM F963-04 Toy Impact ResistanceASTM F963-05 Toy Mechanical Strength TestingASTM F963-06 Sharp Edges and Points TestASTM F963-07 Mechanical Performance of Toy SurfacesASTM F963-08 Toy Impact TestingASTM F963-09 Toy Durability under Compressive ForcesASTM F963-10 Toy Tension TestingASTM F963-11 Toy Fatigue TestingASTM F963-12 Toy Drop TestASTM F963-13 Mechanical Safety of Toy ComponentsASTM F963-14 Pulling Force on Toy StringsASTM F963-15 Sharp Point and Edge TestingASTM F963-17 Mechanical Hazard TestingASTM F963-80 Mechanical Safety CertificationASTM F963-81 Mechanical Strength and DurabilityASTM F963-82 Mechanical Safety ComplianceASTM F963-83 Mechanical Durability EvaluationASTM F963-84 Mechanical Safety TestsASTM F963-85 Mechanical Strength and Safety TestingASTM F963-86 Mechanical Safety AssessmentASTM F963-87 Mechanical Properties EvaluationASTM F963-88 Mechanical and Physical Properties TestingASTM F963-89 Mechanical Strength Testing of ToysASTM F963-90 Mechanical Safety EvaluationASTM F963-91 Mechanical Testing of ToysASTM F963-92 Mechanical Safety TestingASTM F963-93 Mechanical Strength TestingASTM F963-94 Mechanical Performance TestingASTM F963-95 Mechanical Durability TestingASTM F963-96 Mechanical Properties TestingASTM F963-97 Mechanical Safety of Toy SurfacesASTM F963-98 Toy Durability TestingASTM F963-99 Mechanical Safety RequirementsEN 71-1 Mechanical and Physical Properties of ToysEN 71-10 Organic Chemical Compounds in ToysEN 71-13 Migration of Certain Elements in ToysEN 71-14 Toy Surface Coatings SafetyEN 71-15 Safety of Toys with Electrical ComponentsEN 71-16 Mechanical and Physical Properties of Toy AccessoriesEN 71-17 Safety Requirements for Soft ToysEN 71-18 Toy Parts Attachment StrengthEN 71-19 Testing of Toy Surface CoatingsEN 71-2 Flammability of ToysEN 71-20 Mechanical Strength of Toy AssembliesEN 71-21 Mechanical Properties of Toy WheelsEN 71-22 Testing of Toy Battery Operated ComponentsEN 71-23 Safety of Toys with Moving PartsEN 71-24 Toy Surface Abrasion ResistanceEN 71-25 Safety Requirements for Toy AccessoriesEN 71-26 Testing of Toy BatteriesEN 71-27 Testing of Toy Surface CoatingsEN 71-28 Mechanical and Physical Properties of Toy ComponentsEN 71-29 Mechanical Impact ResistanceEN 71-3 Migration of ElementsEN 71-30 Testing of Toy Parts AttachmentEN 71-31 Mechanical Properties of Toy MaterialsEN 71-32 Safety Requirements for Mechanical ToysEN 71-33 Testing of Toy Mechanical ComponentsEN 71-34 Mechanical Durability of ToysEN 71-35 Testing of Toy Surface Abrasion ResistanceEN 71-36 Testing of Toy Parts and ComponentsEN 71-37 Mechanical Strength of Toy AssembliesEN 71-38 Testing of Toy Battery SafetyEN 71-39 Safety Requirements for Toy Mechanical PropertiesEN 71-4 Experimental Sets for Chemistry and Related ActivitiesEN 71-40 Mechanical and Physical Testing for Toy SafetyEN 71-5 Chemical Toy Safety TestingEN 71-6 Organic Chemical Compounds in ToysEN 71-7 Finger Paints SafetyEN 71-8 Activity Toys for Domestic UseEN 71-9 Soluble Elements in ToysISO 18119 Toy Safety – Drop Test for ToysISO 8124-1 Safety of Toys – Mechanical and Physical PropertiesISO 8124-10 Small Parts TestingISO 8124-11 Strength Testing for Toys with WheelsISO 8124-12 Testing of Toy String and Cord SafetyISO 8124-13 Mechanical Impact Resistance TestingISO 8124-14 Testing of Toy Cords and ElasticsISO 8124-15 Mechanical Safety of Toy WheelsISO 8124-17 Mechanical Durability of ToysISO 8124-18 Impact Testing of Toy MaterialsISO 8124-19 Testing for Toy Material ToxicityISO 8124-2 Flammability Testing of ToysISO 8124-20 Mechanical Impact Test on ToysISO 8124-21 Toy String and Cord Safety TestingISO 8124-22 Testing of Toy Components for Mechanical SafetyISO 8124-23 Mechanical Impact ResistanceISO 8124-24 Mechanical and Physical Properties of Toy MaterialsISO 8124-25 Mechanical Strength of ToysISO 8124-26 Mechanical Impact TestISO 8124-27 Mechanical Durability of Toy ComponentsISO 8124-28 Testing of Toy Materials for Mechanical StrengthISO 8124-29 Mechanical and Physical Tests for ToysISO 8124-3 Migration of Certain Elements in ToysISO 8124-30 Mechanical Durability TestingISO 8124-31 Mechanical Testing for Toy SafetyISO 8124-32 Mechanical Strength and Durability TestingISO 8124-33 Mechanical Impact TestingISO 8124-34 Mechanical and Physical Testing of Toy MaterialsISO 8124-35 Mechanical Performance TestingISO 8124-36 Mechanical and Physical Properties TestingISO 8124-37 Mechanical Impact Resistance TestingISO 8124-38 Mechanical and Physical Durability TestingISO 8124-39 Mechanical Performance AssessmentISO 8124-4 Mechanical Tests for Toy AccessoriesISO 8124-5 Testing of Toys for Small PartsISO 8124-6 Mechanical Strength Testing of ToysISO 8124-7 Mechanical and Physical Properties of Children's FurnitureISO 8124-8 Testing of Mechanical ToysISO 8124-9 Mechanical Performance of Battery Operated Toys

ISO 8124-16 Testing of Small Parts in Toys: Laboratory Testing Services

The ISO 8124-16 standard is a globally recognized testing standard for small parts in toys, ensuring the safety and quality of products intended for children. This standard is part of the larger ISO 8124 series, which covers various aspects of toy safety.

Relevant Standards

  • ISO 8124: A series of standards that cover the safety requirements for toys.

  • ASTM F963: An American Society for Testing and Materials (ASTM) standard that sets forth specific safety requirements for toys.

  • EN 71: A European Union (EU) directive that outlines the safety requirements for toys, including small parts.

  • TSE 108: A Turkish Standard that specifies the safety requirements for toys.

    • Legal and Regulatory Framework

    The ISO 8124-16 standard is mandatory in various countries, including the EU, Turkey, and many others. Manufacturers must ensure compliance with these regulations to avoid product recalls, fines, or even imprisonment.

    International and National Standards

  • ISO 8124-1: General safety requirements for toys.

  • ISO 8124-2: Safety requirements for toy products.

  • ISO 8124-3: Safety requirements for toys intended for use by children under the age of three years.

  • EN 71: Safety requirements for toys.

    • Standard Development Organizations

  • International Organization for Standardization (ISO): Develops and publishes international standards, including ISO 8124-16.

  • American Society for Testing and Materials (ASTM): Develops and publishes standards for various industries, including toys.

  • European Committee for Electrotechnical Standardization (CENELEC): Develops and publishes European Standards.

    • Standard Evolution and Updates

    Standards are regularly reviewed and updated to reflect changes in technology, regulations, or consumer expectations. Manufacturers must stay informed about updates to ensure compliance.

    Specific Standard Numbers and Scope

  • ISO 8124-16: Testing of small parts in toys.

  • Scope: This standard specifies the requirements for testing small parts in toys to ensure safety and quality.

    • Industry-Specific Compliance Requirements

    Compliance with ISO 8124-16 is essential for various industries, including:

  • Toy manufacturing

  • Consumer goods

  • Childrens products

  • Electronics

  • Home appliances

    • The ISO 8124-16 standard requires manufacturers to test small parts in toys to ensure safety and quality. This testing ensures that the product does not pose a risk to children, such as choking hazards or other harm.

    Why is this Specific Test Needed?

    This test is necessary because small parts can be easily detached from toys and swallowed by children, leading to serious health issues.

    Business and Technical Reasons for Conducting ISO 8124-16 Testing

    Conducting this test ensures:

  • Compliance with regulatory requirements

  • Safety of products for consumers

  • Quality assurance and control

  • Competitive advantage through demonstration of commitment to safety and quality

  • Cost savings by avoiding product recalls and fines

  • Improved customer confidence and trust

    • Consequences of Not Performing this Test

    Failure to conduct this test can result in:

  • Product recalls and fines

  • Damage to brand reputation and loss of customers

  • Regulatory actions, including imprisonment or hefty penalties

  • Loss of market share due to competitions compliance with regulatory requirements

    • The ISO 8124-16 standard specifies the testing conditions and methodology for small parts in toys.

    Testing Equipment and Instruments Used

  • Sieving equipment: For separating small parts from other materials

  • Microscope: For examining small parts under magnification

  • Measuring instruments: For measuring dimensions and weights of small parts

    • Testing Environment Requirements

    The testing environment must meet the following conditions:

  • Temperature: 23C 5C (73F 9F)

  • Humidity: 50 10

  • Pressure: 1013 mbar 13 mbar

  • Lighting: Standard laboratory lighting conditions

    • Sample Preparation Procedures

    The testing sample must be representative of the product and comply with the following procedures:

  • Sampling: Select a random sample from the production batch.

  • Cleaning: Clean the sample to ensure accurate results.

    • Testing Parameters and Conditions

    The test is conducted under the following parameters:

  • Temperature: 23C 5C (73F 9F)

  • Humidity: 50 10

  • Pressure: 1013 mbar 13 mbar

  • Lighting: Standard laboratory lighting conditions

    • Measurement and Analysis Methods

    The test results are measured and analyzed using the following methods:

  • Visual examination: To identify small parts.

  • Measurement: Using measuring instruments to determine dimensions and weights of small parts.

    • Measurement Uncertainty

    The measurement uncertainty is determined using a combination of:

  • Repeatability: The variability in measurements when repeated under the same conditions.

  • Reproducibility: The variability in measurements between different laboratories or testing equipment.

    • Certification and Accreditation

    The laboratory conducting the test must be certified by a recognized accreditation body, such as ISO 17025.

    Test Report and Certificate

    The test report and certificate must include:

  • Summary of test results: Including any deviations from the standard.

  • Conclusion: Indicating compliance or non-compliance with the standard.

    • ... (rest of the text continues in the next response)

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers