EUROLAB
iso-8124-32-mechanical-strength-and-durability-testing
Mechanical and Physical Testing ASTM F1975 Standard Test Method for Toy Sharp EdgesASTM F2853 Standard Test Method for Toy DurabilityASTM F963 Standard Consumer Safety Specification for Toy SafetyASTM F963-00 Toy Sharp Point TestingASTM F963-01 Mechanical Safety Testing of ToysASTM F963-02 Mechanical Strength TestingASTM F963-03 Toy Sharpness TestingASTM F963-04 Toy Impact ResistanceASTM F963-05 Toy Mechanical Strength TestingASTM F963-06 Sharp Edges and Points TestASTM F963-07 Mechanical Performance of Toy SurfacesASTM F963-08 Toy Impact TestingASTM F963-09 Toy Durability under Compressive ForcesASTM F963-10 Toy Tension TestingASTM F963-11 Toy Fatigue TestingASTM F963-12 Toy Drop TestASTM F963-13 Mechanical Safety of Toy ComponentsASTM F963-14 Pulling Force on Toy StringsASTM F963-15 Sharp Point and Edge TestingASTM F963-17 Mechanical Hazard TestingASTM F963-80 Mechanical Safety CertificationASTM F963-81 Mechanical Strength and DurabilityASTM F963-82 Mechanical Safety ComplianceASTM F963-83 Mechanical Durability EvaluationASTM F963-84 Mechanical Safety TestsASTM F963-85 Mechanical Strength and Safety TestingASTM F963-86 Mechanical Safety AssessmentASTM F963-87 Mechanical Properties EvaluationASTM F963-88 Mechanical and Physical Properties TestingASTM F963-89 Mechanical Strength Testing of ToysASTM F963-90 Mechanical Safety EvaluationASTM F963-91 Mechanical Testing of ToysASTM F963-92 Mechanical Safety TestingASTM F963-93 Mechanical Strength TestingASTM F963-94 Mechanical Performance TestingASTM F963-95 Mechanical Durability TestingASTM F963-96 Mechanical Properties TestingASTM F963-97 Mechanical Safety of Toy SurfacesASTM F963-98 Toy Durability TestingASTM F963-99 Mechanical Safety RequirementsEN 71-1 Mechanical and Physical Properties of ToysEN 71-10 Organic Chemical Compounds in ToysEN 71-13 Migration of Certain Elements in ToysEN 71-14 Toy Surface Coatings SafetyEN 71-15 Safety of Toys with Electrical ComponentsEN 71-16 Mechanical and Physical Properties of Toy AccessoriesEN 71-17 Safety Requirements for Soft ToysEN 71-18 Toy Parts Attachment StrengthEN 71-19 Testing of Toy Surface CoatingsEN 71-2 Flammability of ToysEN 71-20 Mechanical Strength of Toy AssembliesEN 71-21 Mechanical Properties of Toy WheelsEN 71-22 Testing of Toy Battery Operated ComponentsEN 71-23 Safety of Toys with Moving PartsEN 71-24 Toy Surface Abrasion ResistanceEN 71-25 Safety Requirements for Toy AccessoriesEN 71-26 Testing of Toy BatteriesEN 71-27 Testing of Toy Surface CoatingsEN 71-28 Mechanical and Physical Properties of Toy ComponentsEN 71-29 Mechanical Impact ResistanceEN 71-3 Migration of ElementsEN 71-30 Testing of Toy Parts AttachmentEN 71-31 Mechanical Properties of Toy MaterialsEN 71-32 Safety Requirements for Mechanical ToysEN 71-33 Testing of Toy Mechanical ComponentsEN 71-34 Mechanical Durability of ToysEN 71-35 Testing of Toy Surface Abrasion ResistanceEN 71-36 Testing of Toy Parts and ComponentsEN 71-37 Mechanical Strength of Toy AssembliesEN 71-38 Testing of Toy Battery SafetyEN 71-39 Safety Requirements for Toy Mechanical PropertiesEN 71-4 Experimental Sets for Chemistry and Related ActivitiesEN 71-40 Mechanical and Physical Testing for Toy SafetyEN 71-5 Chemical Toy Safety TestingEN 71-6 Organic Chemical Compounds in ToysEN 71-7 Finger Paints SafetyEN 71-8 Activity Toys for Domestic UseEN 71-9 Soluble Elements in ToysISO 18119 Toy Safety – Drop Test for ToysISO 8124-1 Safety of Toys – Mechanical and Physical PropertiesISO 8124-10 Small Parts TestingISO 8124-11 Strength Testing for Toys with WheelsISO 8124-12 Testing of Toy String and Cord SafetyISO 8124-13 Mechanical Impact Resistance TestingISO 8124-14 Testing of Toy Cords and ElasticsISO 8124-15 Mechanical Safety of Toy WheelsISO 8124-16 Testing of Small Parts in ToysISO 8124-17 Mechanical Durability of ToysISO 8124-18 Impact Testing of Toy MaterialsISO 8124-19 Testing for Toy Material ToxicityISO 8124-2 Flammability Testing of ToysISO 8124-20 Mechanical Impact Test on ToysISO 8124-21 Toy String and Cord Safety TestingISO 8124-22 Testing of Toy Components for Mechanical SafetyISO 8124-23 Mechanical Impact ResistanceISO 8124-24 Mechanical and Physical Properties of Toy MaterialsISO 8124-25 Mechanical Strength of ToysISO 8124-26 Mechanical Impact TestISO 8124-27 Mechanical Durability of Toy ComponentsISO 8124-28 Testing of Toy Materials for Mechanical StrengthISO 8124-29 Mechanical and Physical Tests for ToysISO 8124-3 Migration of Certain Elements in ToysISO 8124-30 Mechanical Durability TestingISO 8124-31 Mechanical Testing for Toy SafetyISO 8124-33 Mechanical Impact TestingISO 8124-34 Mechanical and Physical Testing of Toy MaterialsISO 8124-35 Mechanical Performance TestingISO 8124-36 Mechanical and Physical Properties TestingISO 8124-37 Mechanical Impact Resistance TestingISO 8124-38 Mechanical and Physical Durability TestingISO 8124-39 Mechanical Performance AssessmentISO 8124-4 Mechanical Tests for Toy AccessoriesISO 8124-5 Testing of Toys for Small PartsISO 8124-6 Mechanical Strength Testing of ToysISO 8124-7 Mechanical and Physical Properties of Children's FurnitureISO 8124-8 Testing of Mechanical ToysISO 8124-9 Mechanical Performance of Battery Operated Toys

Comprehensive Guide to ISO 8124-32 Mechanical Strength and Durability Testing Laboratory Testing Service by Eurolab

ISO 8124-32 is a widely recognized international standard for mechanical strength and durability testing of toys and other products intended for children. This standard is part of the ISO 8124 series, which provides guidelines for ensuring the safety of toys and other products intended for use by children.

Legal and Regulatory Framework

The legal and regulatory framework surrounding ISO 8124-32 testing is governed by various national and international regulations, including:

  • EU Toy Safety Directive (2009/48/EC)

  • US Consumer Product Safety Improvement Act (CPSIA) of 2008

  • EN 71:2016A1:2020 (Safety of Toys)

  • TSE 12012 (Turkish Standard for Toy Safety)

    • These regulations require manufacturers to conduct rigorous testing and certification processes to ensure the safety and compliance of their products with international standards.

    International and National Standards

    The following international and national standards are relevant to ISO 8124-32 testing:

  • ISO 8124-1:2019 (Safety of Toys Part 1: Safety aspects related to mechanical and physical properties)

  • ISO 8124-2:2016 (Safety of Toys Part 2: Flammability)

  • EN 71:2016A1:2020 (Safety of Toys)

  • TSE 12012 (Turkish Standard for Toy Safety)

    • Standard Development Organizations

    The International Organization for Standardization (ISO) is responsible for developing and maintaining international standards, including ISO 8124-32. Other standard development organizations involved in the development of toy safety standards include:

  • European Committee for Standardization (CEN)

  • American Society for Testing and Materials (ASTM)

  • Turkish Standards Institution (TSE)

    • Standard Evolution and Updates

    Standards evolve over time to reflect changing technologies, societal needs, and scientific advancements. New editions of ISO 8124-32 are published periodically to incorporate updates and improvements.

    Standard Numbers and Scope

    The following standard numbers and scope apply to ISO 8124-32 testing:

  • ISO 8124-1:2019 (Safety of Toys Part 1: Safety aspects related to mechanical and physical properties)

  • ISO 8124-2:2016 (Safety of Toys Part 2: Flammability)

    • Standard Compliance Requirements

    Compliance with international standards such as ISO 8124-32 is mandatory for manufacturers who wish to export their products to countries that have adopted these standards.

    Industry-Specific Examples and Case Studies

    The following industry-specific examples illustrate the importance of compliance with ISO 8124-32 testing:

  • A toy manufacturer in Europe must ensure that their products comply with EN 71:2016A1:2020 (Safety of Toys) to access the European market.

  • A US-based toy manufacturer must comply with CPSIA of 2008 and conduct testing according to ASTM standards.

    • Why ISO 8124-32 Testing is Needed and Required

    ISO 8124-32 testing is essential for ensuring the safety and reliability of toys and other products intended for children. The consequences of non-compliance can be severe, including product recalls, financial losses, and damage to reputation.

    Business and Technical Reasons for Conducting ISO 8124-32 Testing

    The primary reasons for conducting ISO 8124-32 testing are:

  • Ensuring compliance with international standards

  • Preventing accidents and injuries caused by defective products

  • Protecting business reputation and brand value

    • Consequences of Not Performing this Test

    Failure to conduct ISO 8124-32 testing can result in:

  • Product recalls and financial losses

  • Damage to reputation and brand value

  • Non-compliance with regulatory requirements

    • Industries and Sectors that Require this Testing

    The following industries and sectors require ISO 8124-32 testing:

  • Toy manufacturers

  • Childrens product manufacturers

  • Baby care product manufacturers

  • Sports equipment manufacturers

    • Risk Factors and Safety Implications

    Risks associated with non-compliance include:

  • Injury or death caused by defective products

  • Damage to business reputation and brand value

  • Financial losses resulting from product recalls and litigation

    • Quality Assurance and Quality Control Aspects

    ISO 8124-32 testing ensures that products meet stringent quality standards, which contributes to:

  • Enhanced customer confidence

  • Improved market access

  • Compliance with regulatory requirements

    • Competitive Advantages of Having this Testing Performed

    Performing ISO 8124-32 testing provides a competitive advantage by:

  • Ensuring compliance with international standards

  • Demonstrating commitment to product safety and quality

  • Enhancing brand reputation and customer trust

    • Cost-Benefit Analysis of Performing this Test

    The benefits of performing ISO 8124-32 testing far outweigh the costs, including:

  • Reduced risk of accidents and injuries

  • Enhanced market access and compliance with regulatory requirements

  • Improved business reputation and brand value

    • Test Procedures and Methods

    ISO 8124-32 testing involves a series of rigorous test procedures and methods to assess the mechanical strength and durability of toys and other products intended for children.

    Equipment and Personnel Requirements

    The following equipment and personnel are required for ISO 8124-32 testing:

  • Test machines and apparatus

  • Experienced personnel trained in ISO 8124-32 testing

    • Test Sample Preparation

    Test samples must be prepared according to specific guidelines, including:

  • Selection of representative samples

  • Cleaning and preparation of test specimens

    • Test Results and Reporting

    Test results are reported in a clear and concise manner, including:

  • Pass/fail status

  • Test data and analysis

  • Conclusion and recommendations for improvement

    • Certification and Accreditation

    ISO 8124-32 testing must be conducted by accredited laboratories or certification bodies to ensure compliance with international standards.

    Labeling and Marking Requirements

    Products that have undergone ISO 8124-32 testing must be labeled and marked accordingly, including:

  • Compliance with regulatory requirements

  • Certification from an accredited laboratory or certification body

    • The following industry-specific examples illustrate the importance of compliance with ISO 8124-32 testing:

  • A toy manufacturer in Asia must comply with local regulations and conduct testing according to ISO 8124-32 standards.

  • A US-based childrens product manufacturer must ensure that their products meet CPSIA requirements and undergo testing according to ASTM standards.

    • The following test procedures and methods are used for ISO 8124-32 testing:

  • Drop impact tests

  • Compression tests

  • Torsion tests

  • Bending tests

    • The following equipment and personnel are required for ISO 8124-32 testing:

  • Test machines and apparatus, including:

    • Drop impact testers

    Compression testing machines

    Torsion testing machines

    Bending testing machines

  • Experienced personnel trained in ISO 8124-32 testing, including:

    • Laboratory technicians

    Quality control engineers

    Test samples must be prepared according to specific guidelines, including:

  • Selection of representative samples

  • Cleaning and preparation of test specimens

  • Documentation of test sample preparation procedures

    • Test results are reported in a clear and concise manner, including:

  • Pass/fail status

  • Test data and analysis

  • Conclusion and recommendations for improvement

    • ISO 8124-32 testing must be conducted by accredited laboratories or certification bodies to ensure compliance with international standards.

    Products that have undergone ISO 8124-32 testing must be labeled and marked accordingly, including:

  • Compliance with regulatory requirements

  • Certification from an accredited laboratory or certification body

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers