EUROLAB
aashto-t119-compressive-strength-of-cylindrical-concrete-specimens
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

AASHTO T119 Compressive Strength of Cylindrical Concrete Specimens Laboratory Testing Service

The AASHTO T119 Compressive Strength of Cylindrical Concrete Specimens laboratory testing service is governed by various international and national standards. The most relevant standards for this test are:

  • AASHTO T119: This standard specifies the procedure for determining the compressive strength of cylindrical concrete specimens.

  • ASTM C39: This standard provides a similar procedure to AASHTO T119, with some differences in testing parameters and requirements.

  • EN 12390-3: This European standard specifies the method for determining the compressive strength of concrete specimens.

  • TSE EN 12390-3: This Turkish standard is based on the European standard EN 12390-3.

    • The AASHTO T119 standard is a widely accepted and adopted standard in the construction industry. It provides a comprehensive guide to testing cylindrical concrete specimens for compressive strength. The standard includes requirements for sampling, specimen preparation, testing equipment, and data analysis.

    Standard Development Organizations

    The development of standards such as AASHTO T119 involves various organizations. These include:

  • AASHTO: The American Association of State Highway and Transportation Officials (AASHTO) is a not-for-profit association that develops and publishes standards for transportation infrastructure.

  • ASTM: The American Society for Testing and Materials (ASTM) is an international organization that develops and publishes standards for materials, products, and systems.

  • CEN: The European Committee for Standardization (CEN) is responsible for developing and publishing European standards.

    • Standard Evolution and Updates

    Standards evolve over time to reflect changes in technology, industry practices, and regulatory requirements. Updates to standards such as AASHTO T119 may involve revisions to testing parameters, equipment requirements, or data analysis methods.

    International and National Standards

    The adoption of international and national standards for laboratory testing services is crucial for ensuring consistency and comparability across different regions and countries. For example:

  • ISO 17025: This international standard specifies the general requirements for the competence of testing and calibration laboratories.

  • EN ISO 9001: This European standard specifies the requirements for a quality management system.

    • Standard Compliance Requirements

    Standards compliance is essential for industries such as construction, infrastructure development, and manufacturing. Failure to comply with standards can result in costly penalties, reputational damage, or even business closure.

    In conclusion, the AASHTO T119 Compressive Strength of Cylindrical Concrete Specimens laboratory testing service is governed by various international and national standards. These standards provide a comprehensive guide to testing cylindrical concrete specimens for compressive strength.

    The AASHTO T119 Compressive Strength of Cylindrical Concrete Specimens laboratory testing service is necessary for ensuring the quality, safety, and reliability of concrete structures. This test provides valuable information on the compressive strength of cylindrical concrete specimens, which is critical for designing and constructing safe and durable infrastructure.

    Business and Technical Reasons

    The main reasons for conducting AASHTO T119 testing are:

  • Quality control: Ensuring that concrete meets specified requirements for compressive strength.

  • Safety: Verifying that concrete structures can withstand loads and stresses without collapsing or failing.

  • Compliance: Meeting regulatory requirements for construction, infrastructure development, and manufacturing.

    • Consequences of Not Performing this Test

    Failure to conduct AASHTO T119 testing can result in:

  • Structural failures: Concrete structures may collapse or fail due to inadequate compressive strength.

  • Safety risks: Users of concrete structures may be exposed to safety hazards due to poor quality concrete.

  • Regulatory penalties: Non-compliance with standards and regulations can lead to costly fines and reputational damage.

    • Industries and Sectors

    The AASHTO T119 Compressive Strength of Cylindrical Concrete Specimens laboratory testing service is essential for various industries, including:

  • Construction

  • Infrastructure development

  • Manufacturing

  • Mining

    • Risk Factors and Safety Implications

    Conducting AASHTO T119 testing involves risks associated with:

  • Sample handling: Ensuring that specimens are handled carefully to avoid damage.

  • Equipment operation: Operating testing equipment safely and efficiently.

  • Data analysis: Interpreting test results correctly to ensure accurate conclusions.

    • Quality Assurance and Quality Control

    Implementing quality assurance and control measures is crucial for ensuring the accuracy and reliability of AASHTO T119 testing. This includes:

  • Sample preparation: Ensuring that specimens are prepared correctly.

  • Testing equipment calibration: Calibrating testing equipment regularly to maintain accuracy.

  • Data analysis: Interpreting test results correctly.

    • In conclusion, the AASHTO T119 Compressive Strength of Cylindrical Concrete Specimens laboratory testing service is essential for ensuring the quality, safety, and reliability of concrete structures. This test provides valuable information on the compressive strength of cylindrical concrete specimens, which is critical for designing and constructing safe and durable infrastructure.

    Please see the next section for more information on the laboratory testing service.

    ---

    Laboratory Testing Service

    The laboratory testing service for AASHTO T119 involves several steps, including:

    1. Sample collection: Collecting cylindrical concrete specimens from construction sites or manufacturing facilities.

    2. Sample preparation: Preparing specimens for testing by cutting, curing, and machining them to the required dimensions.

    3. Testing equipment operation: Operating testing equipment safely and efficiently to obtain accurate test results.

    4. Data analysis: Interpreting test results correctly to ensure accurate conclusions.

    The laboratory testing service is essential for ensuring that concrete structures meet specified requirements for compressive strength. This test provides valuable information on the quality, safety, and reliability of concrete structures.

    Testing Parameters

    The AASHTO T119 standard specifies several testing parameters, including:

  • Compressive strength: The maximum load that a cylindrical concrete specimen can withstand before failing.

  • Specimen size: The diameter and height of the cylindrical concrete specimen.

  • Curing conditions: The temperature and humidity conditions under which specimens are cured.

    • Equipment Requirements

    The AASHTO T119 standard specifies several equipment requirements, including:

  • Compressive testing machine: A machine capable of applying a compressive load to the cylindrical concrete specimen.

  • Sensors and data acquisition system: Equipment for measuring and recording test results accurately.

    • In conclusion, the laboratory testing service for AASHTO T119 is essential for ensuring that concrete structures meet specified requirements for compressive strength. This test provides valuable information on the quality, safety, and reliability of concrete structures.

    ---

    Please let me know if you want me to continue with the rest of the guide.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers