EUROLAB
astm-c805-rebound-number-of-hardened-concrete
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

ASTM C805 Rebound Number of Hardened Concrete Laboratory Testing Service: A Comprehensive Guide

ASTM C805 is a widely recognized standard for the Rebound Number of Hardened Concrete testing, developed by the American Society for Testing and Materials (ASTM). This standard is an essential tool for ensuring the quality and durability of concrete structures. In this section, we will delve into the relevant standards that govern ASTM C805 Rebound Number of Hardened Concrete testing.

Legal and Regulatory Framework

The legal and regulatory framework surrounding ASTM C805 Rebound Number of Hardened Concrete testing is governed by national and international standards. The standard is a requirement for many industries, including construction, civil engineering, and infrastructure development.

  • International Standards: ISO 6707-1 (2014), ISO 15630-2 (2009), and EN 12390-3 (2009) are some of the key international standards that reference ASTM C805.

  • National Standards: ASTM C805 is referenced in national standards, such as AS 1012.19-2008 (Australia) and CSA A23.1-09 (Canada).

  • Standard Development Organizations: The American Society for Testing and Materials (ASTM), the International Organization for Standardization (ISO), and the European Committee for Standardization (CEN) are some of the key standard development organizations.

    • International and National Standards

    The following standards apply to ASTM C805 Rebound Number of Hardened Concrete testing:

  • ISO 6707-1:2014: Building materials Sampling Part 1: Guidelines for sampling.

  • ISO 15630-2:2009: Geometrical product specifications (GPS) Dimensional and geometrical tolerances for linear and angular dimensions Part 2: Dimensioning and tolerancing of single parts.

  • EN 12390-3:2009: Testing hardened concrete. Compressive strength of test specimens.

    • Standard Compliance Requirements

    The following industries require compliance with ASTM C805 Rebound Number of Hardened Concrete testing:

    1. Construction

    2. Civil engineering

    3. Infrastructure development

    In this section, we will provide a detailed explanation of the test conditions and methodology for ASTM C805 Rebound Number of Hardened Concrete testing.

    Testing Equipment and Instruments

    The following equipment is required for conducting ASTM C805 Rebound Number of Hardened Concrete testing:

  • Rebound Hammer: A rebound hammer is used to measure the hardness of concrete.

  • Anvil: An anvil is used as a reference surface for the rebound hammer.

  • Calibration Device: A calibration device is required to calibrate the rebound hammer.

    • Sample Preparation Procedures

    The following procedures are followed when preparing samples for ASTM C805 Rebound Number of Hardened Concrete testing:

    1. Sampling: Samples are taken from the concrete structure using a sampling device or sawing.

    2. Curing: The samples are cured in a controlled environment to simulate the actual conditions.

    3. Testing: The rebound hammer is used to measure the hardness of the concrete.

    Testing Parameters and Conditions

    The following parameters and conditions are considered when conducting ASTM C805 Rebound Number of Hardened Concrete testing:

  • Temperature: The temperature of the sample should be between 20C and 30C.

  • Humidity: The relative humidity should be between 40 and 60.

  • Pressure: The pressure on the anvil should be calibrated to 10 kgf.

    • Measurement and Analysis Methods

    The following methods are used to measure and analyze the results of ASTM C805 Rebound Number of Hardened Concrete testing:

    1. Measurement: The rebound hammer is used to measure the hardness of the concrete.

    2. Calculation: The calculated value is obtained using the formula provided in the standard.

    Quality Control Measures

    The following quality control measures are taken during ASTM C805 Rebound Number of Hardened Concrete testing:

  • Calibration: The rebound hammer and calibration device are calibrated before each test.

  • Documentation: All test data is documented and stored for future reference.

    • In this section, we will explain how test results are documented and reported in ASTM C805 Rebound Number of Hardened Concrete testing.

    Reporting Format and Structure

    The following format and structure are used when reporting the results of ASTM C805 Rebound Number of Hardened Concrete testing:

    1. Test report: The test report includes the sample details, test conditions, and calculated value.

    2. Calibration certificate: A calibration certificate is included with the test report.

    Interpretation of Test Results

    The following interpretation is used when analyzing the results of ASTM C805 Rebound Number of Hardened Concrete testing:

  • Hardness: The hardness of the concrete is obtained from the calculated value.

  • Acceptance criteria: The acceptance criteria are defined in the standard.

    • In this section, we will provide a detailed explanation of the test conditions and methodology for ASTM C805 Rebound Number of Hardened Concrete testing.

    Testing Equipment and Instruments

    The following equipment is required for conducting ASTM C805 Rebound Number of Hardened Concrete testing:

  • Rebound Hammer: A rebound hammer is used to measure the hardness of concrete.

  • Anvil: An anvil is used as a reference surface for the rebound hammer.

  • Calibration Device: A calibration device is required to calibrate the rebound hammer.

    • Sample Preparation Procedures

    The following procedures are followed when preparing samples for ASTM C805 Rebound Number of Hardened Concrete testing:

    1. Sampling: Samples are taken from the concrete structure using a sampling device or sawing.

    2. Curing: The samples are cured in a controlled environment to simulate the actual conditions.

    3. Testing: The rebound hammer is used to measure the hardness of the concrete.

    Testing Parameters and Conditions

    The following parameters and conditions are considered when conducting ASTM C805 Rebound Number of Hardened Concrete testing:

  • Temperature: The temperature of the sample should be between 20C and 30C.

  • Humidity: The relative humidity should be between 40 and 60.

  • Pressure: The pressure on the anvil should be calibrated to 10 kgf.

    • Measurement and Analysis Methods

    The following methods are used to measure and analyze the results of ASTM C805 Rebound Number of Hardened Concrete testing:

    1. Measurement: The rebound hammer is used to measure the hardness of the concrete.

    2. Calculation: The calculated value is obtained using the formula provided in the standard.

    Quality Control Measures

    The following quality control measures are taken during ASTM C805 Rebound Number of Hardened Concrete testing:

  • Calibration: The rebound hammer and calibration device are calibrated before each test.

  • Documentation: All test data is documented and stored for future reference.

    • In this section, we will explain how test results are documented and reported in ASTM C805 Rebound Number of Hardened Concrete testing.

    Reporting Format and Structure

    The following format and structure are used when reporting the results of ASTM C805 Rebound Number of Hardened Concrete testing:

    1. Test report: The test report includes the sample details, test conditions, and calculated value.

    2. Calibration certificate: A calibration certificate is included with the test report.

    Interpretation of Test Results

    The following interpretation is used when analyzing the results of ASTM C805 Rebound Number of Hardened Concrete testing:

  • Hardness: The hardness of the concrete is obtained from the calculated value.

  • Acceptance criteria: The acceptance criteria are defined in the standard.

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers