EUROLAB
aashto-t22-slump-test-for-fresh-concrete
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

AASHTO T22 Slump Test for Fresh Concrete Laboratory Testing Service Provided by Eurolab

The AASHTO T22 Slump Test for Fresh Concrete is a widely recognized laboratory test used to evaluate the workability and flowability of fresh concrete. This test is governed by various international and national standards, including:

  • AASHTO T 22: Standard Method of Test for Workability of Freshly Mixed Concrete (American Association of State Highway and Transportation Officials)

  • ASTM C 143/C 143M-14: Standard Test Method for Slump of Hydraulic-Cement Concrete (American Society for Testing and Materials)

  • EN 12350-2:2009A1:2016: Testing fresh concrete - Part 2: Slump test (European Committee for Standardization)

  • TSE 800:2007: Freshly mixed concrete testing methods (Turkish Standards Institution)

    • These standards provide a framework for laboratory personnel to conduct the test with consistency and accuracy. The legal and regulatory framework surrounding this testing service is primarily driven by national and international regulations, such as:

  • OSHA (Occupational Safety and Health Administration) guidelines

  • EPA (Environmental Protection Agency) regulations

  • AASHTOs Quality Management System (QMS)

    • Standard development organizations, such as the American Society for Testing and Materials (ASTM), play a crucial role in developing and updating standards. These organizations ensure that standards remain relevant and effective in meeting industry needs.

    The AASHTO T22 Slump Test is essential for ensuring the quality and consistency of fresh concrete. This test provides valuable insights into the workability and flowability of the mixture, which is critical for achieving desired construction outcomes.

    Business and technical reasons for conducting this test include:

  • Ensuring compliance with regulatory requirements

  • Maintaining product safety and reliability

  • Enhancing customer satisfaction through consistent quality

  • Reducing the risk of costly rework or material waste

    • Consequences of not performing this test include:

  • Reduced product quality and performance

  • Increased risk of construction delays or defects

  • Potential liability for non-compliance with regulations

  • Loss of market share due to inconsistent quality

    • Industries that require this testing service include:

  • Construction and civil engineering

  • Infrastructure development (roads, bridges, airports)

  • Building and architectural projects

    • The AASHTO T22 Slump Test is a relatively straightforward procedure involving the following steps:

    1. Preparation of fresh concrete samples

    2. Measurement of slump using a slump cone or mold

    3. Calculation of slump value based on measured height and spread

    Equipment and instruments used for this test include:

  • Slump cone or mold (AASHTO T 22)

  • Spirit level

  • Ruler or caliper

  • Measuring tape

    • Testing environment requirements include:

  • Temperature: between 73F (23C) and 75F (24C)

  • Humidity: between 50 and 60

  • Pressure: atmospheric pressure

    • Sample preparation procedures involve:

  • Mixing concrete according to the manufacturers instructions

  • Casting samples into the slump cone or mold

  • Allowing samples to set for a specified time

    • Measurement and analysis methods include:

  • Measuring the height of the sample using a spirit level

  • Calculating the spread of the sample using a ruler or caliper

  • Recording and calculating the slump value based on measured data

    • Calibration and validation procedures involve:

  • Regular calibration of equipment (e.g., slump cone, measuring tape)

  • Validation of test results through statistical analysis and comparison with reference values

    • Quality control measures during testing include:

  • Checking the accuracy of equipment and instruments

  • Ensuring proper sample preparation and handling

  • Maintaining a consistent testing environment

    • Data collection and recording procedures involve:

  • Recording measured data using a calibrated instrument (e.g., spirit level)

  • Calculating slump value based on recorded data

  • Documenting test results in a standardized format (e.g., spreadsheet, report)

    • Testing timeframes and duration depend on factors such as:

  • Sample preparation and handling time

  • Testing environment conditions (temperature, humidity)

  • Equipment calibration and validation requirements

    • Sample size requirements and statistical considerations involve:

  • Ensuring sufficient sample size for reliable testing

  • Considering the effects of sampling bias and variability

  • Selecting a suitable statistical method for analysis (e.g., ANOVA, regression)

    • Test results are documented and reported using standardized formats and templates. The reporting process involves:

    1. Data collection and recording

    2. Calculation and interpretation of test results

    3. Preparation of a test report in a standardized format (e.g., spreadsheet, document)

    4. Certification and accreditation aspects

    Certification and accreditation requirements involve:

  • Compliance with relevant standards and regulations

  • Maintenance of equipment calibration and validation records

  • Documenting testing procedures and protocols

    • Industry Applications

    The AASHTO T22 Slump Test has various industry applications, including:

    1. Construction and civil engineering: Ensuring the workability and flowability of fresh concrete for construction projects.

    2. Infrastructure development: Evaluating the slump value of freshly mixed concrete in roads, bridges, and airports.

    3. Building and architectural projects: Assessing the suitability of fresh concrete for building and architectural applications.

    Conclusion

    The AASHTO T22 Slump Test is an essential laboratory test used to evaluate the workability and flowability of fresh concrete. By understanding the standard-related information, requirements, and methodology involved in this test, industry professionals can ensure consistent quality and compliance with regulations.

    Eurolabs Expertise

    At Eurolab, our team of experts has extensive experience in conducting AASHTO T22 Slump Tests for various industries. We provide:

  • Accurate and reliable testing services

  • Compliance with relevant standards and regulations

  • High-quality test reports and documentation

    • Contact us today to learn more about how we can assist you with your AASHTO T22 Slump Test needs.

    ---

    Appendices

    1. Standards and Regulations: List of relevant standards and regulations governing the AASHTO T22 Slump Test.

    2. Industry Applications: Examples of industry applications where the AASHTO T22 Slump Test is used.

    3. Test Methodology: Detailed description of test methodology, including equipment, testing environment, sample preparation, measurement, analysis, and data collection.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers