EUROLAB
en-12390-8-depth-of-penetration-of-water-under-pressure
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

EN 12390-8 Depth of Penetration of Water Under Pressure Laboratory Testing Service: A Comprehensive Guide

The EN 12390-8 standard is a European Standard that defines the requirements for determining the depth of penetration of water under pressure in concrete. This standard is part of the series of standards related to the testing of concrete, and it provides a method for evaluating the ability of concrete to resist the penetration of water under pressure.

Relevant Standards

  • EN 12390-8:2010 (Determination of depth of penetration of water under pressure)

  • ISO 1920-6:2004 (Concrete - Determination of depth of penetration of water under pressure)

  • ASTM C1602/C1602M-15 (Standard Test Method for Depth of Penetration of Water Under Pressure)

  • TSE EN 12390-8:2011 (Turkish Standard)

    • International and National Standards

    The EN 12390-8 standard is widely adopted across Europe, and it is also recognized in other countries around the world. The international standards that govern this testing service are:

  • ISO (International Organization for Standardization)

  • ASTM (American Society for Testing and Materials)

  • TSE (Turkish Standards Institution)

    • Standard Development Organizations

    The development of standards is carried out by organizations such as:

  • CEN (European Committee for Standardization)

  • ISO (International Organization for Standardization)

  • ASTM (American Society for Testing and Materials)

    • These organizations work together to ensure that standards are developed, updated, and maintained in a way that meets the needs of industry and stakeholders.

    Standard Compliance Requirements

    Compliance with the EN 12390-8 standard is required by various industries, including:

  • Construction

  • Civil engineering

  • Architecture

  • Building materials

    • This testing service is essential for ensuring that concrete products meet the required standards for water resistance and durability.

    Standard Evolution and Updates

    Standards evolve over time to reflect changes in technology, industry needs, and regulatory requirements. The EN 12390-8 standard has undergone updates since its initial publication in 1999, with the latest revision being published in 2010.

    Specific Standard Numbers and Scope

    The relevant standard numbers for this testing service are:

  • EN 12390-8:2010

  • ISO 1920-6:2004

    • These standards provide a detailed description of the test method, equipment, and requirements for reporting and documentation.

    Industry-Specific Examples and Case Studies

    Concrete products that require EN 12390-8 testing include:

  • Ready-mixed concrete

  • Precast concrete products

  • Concrete blocks and bricks

    • A case study on a recent project demonstrates the importance of this testing service in ensuring the durability and water resistance of concrete products.

    The EN 12390-8 standard is essential for ensuring that concrete products meet the required standards for water resistance and durability. This testing service is necessary to ensure that concrete products can withstand exposure to water under pressure, which is critical in various industries.

    Business and Technical Reasons

    The business and technical reasons for conducting EN 12390-8 testing include:

  • Ensuring compliance with regulatory requirements

  • Meeting industry standards and specifications

  • Evaluating the durability and water resistance of concrete products

  • Enhancing product safety and reliability

  • Improving customer confidence and trust

    • Consequences of Not Performing this Test

    Not performing this test can result in:

  • Non-compliance with regulatory requirements

  • Failure to meet industry standards and specifications

  • Reduced product safety and reliability

  • Loss of customer confidence and trust

  • Potential for costly repairs or replacements

    • Industries and Sectors that Require this Testing

    The industries and sectors that require EN 12390-8 testing include:

  • Construction

  • Civil engineering

  • Architecture

  • Building materials

    • This testing service is essential for ensuring that concrete products meet the required standards for water resistance and durability.

    Risk Factors and Safety Implications

    The risk factors associated with this testing service are:

  • Equipment failure or malfunction

  • Incorrect test results due to sampling errors or laboratory errors

  • Non-compliance with regulatory requirements

    • The safety implications of this testing service include:

  • Exposure to high-pressure water jets

  • Potential for injury from equipment failure or malfunction

    • Quality Assurance and Quality Control Aspects

    The quality assurance and quality control aspects of this testing service include:

  • Ensuring that equipment is calibrated and validated regularly

  • Verifying the accuracy and precision of test results

  • Maintaining a record of all test data and results

    • Competitive Advantages of Having this Testing Performed

    Performing EN 12390-8 testing can provide competitive advantages in various ways, including:

  • Enhancing product safety and reliability

  • Improving customer confidence and trust

  • Meeting regulatory requirements and industry standards

  • Reducing the risk of costly repairs or replacements

    • Test Method and Equipment

    The test method for determining the depth of penetration of water under pressure involves:

  • Using a high-pressure water jet to simulate exposure to water under pressure

  • Measuring the depth of penetration using specialized equipment

    • The equipment required for this testing service includes:

  • High-pressure water jets

  • Pressure gauges

  • Measuring devices

    • Reporting and Documentation

    The reporting and documentation requirements for this testing service include:

  • Providing a detailed report of test results, including any deviations from standard procedures

  • Maintaining a record of all test data and results

    • Test Specimen Preparation

    The preparation of the test specimen involves:

  • Selecting representative samples of concrete products

  • Preparing the specimens according to standard procedures

    • Standard Operating Procedures (SOPs)

    The SOPs for this testing service include:

  • Ensuring that equipment is calibrated and validated regularly

  • Verifying the accuracy and precision of test results

  • Maintaining a record of all test data and results

    • Equipment Calibration and Validation

    The calibration and validation requirements for this testing service include:

  • Ensuring that equipment is calibrated and validated regularly

  • Verifying the accuracy and precision of test results

    • Test Result Evaluation

    The evaluation of test results involves:

  • Comparing test results to standard values or industry specifications

  • Identifying any deviations from standard procedures

    • Record Keeping and Document Control

    The record keeping and document control requirements for this testing service include:

  • Maintaining a record of all test data and results

  • Ensuring that documents are properly stored and protected.

    • This is just a sample, please let me know if you want me to continue with the rest.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers