EUROLAB
bs-en-1015-11-determination-of-flexural-and-compressive-strength-of-mortar
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

Determination of Flexural and Compressive Strength of Mortar: BS EN 1015-11 Testing Services by Eurolab

BS EN 1015-11 is a European Standard that specifies the requirements for determining the flexural and compressive strength of mortar. The standard is part of the CEN/TC 51 series, which deals with testing of mortars, concrete, aggregates, and other binders.

International and National Standards

The following standards are relevant to BS EN 1015-11:

  • ISO 9097:2003 (E) - Mortar for masonry - Test methods

  • ASTM C270-19 - Standard Specification for Mortar for Unit Masonry

  • TSE 708 - Turkish Standard for Mortar for Masonry

    • Standard Development Organizations

    The development of BS EN 1015-11 was coordinated by the European Committee for Standardization (CEN), which is responsible for creating and maintaining standards in Europe. The standard was drafted by a working group consisting of experts from various countries, including the UK, Germany, France, and Italy.

    Evolution and Updates

    Standards evolve over time to reflect changes in technology, materials, and testing methods. BS EN 1015-11 has undergone several revisions since its initial publication in 1999. The latest version was published in 2010, with minor updates made in 2020 to reflect new testing equipment and methodologies.

    Scope and Compliance Requirements

    BS EN 1015-11 applies to the determination of flexural and compressive strength of mortar used for masonry construction. Compliance with this standard is mandatory for manufacturers, suppliers, and contractors involved in the production, supply, or application of mortar products.

    The standard specifies the following:

  • Flexural strength testing: This involves subjecting a test specimen to a bending load until failure occurs.

  • Compressive strength testing: This involves subjecting a test specimen to an axial compressive load until failure occurs.

    • Industries and Sectors

    BS EN 1015-11 applies to various industries, including:

  • Construction

  • Building materials manufacturing

  • Mortar production

  • Masonry construction

    • Risk Factors and Safety Implications

    Failure to comply with BS EN 1015-11 can result in structural failures, injuries, or fatalities. The standard aims to ensure that mortars used for masonry construction meet the required strength and durability standards.

    Quality Assurance and Quality Control

    Compliance with BS EN 1015-11 requires a quality management system (QMS) that ensures consistent testing results and adherence to the standards requirements. Eurolabs QMS is accredited by UKAS (United Kingdom Accreditation Service) to ISO/IEC 17025:2017, which demonstrates our commitment to providing accurate and reliable test results.

    Consequences of Not Performing This Test

    Failure to perform BS EN 1015-11 testing can lead to:

  • Reduced product quality

  • Increased risk of structural failure

  • Non-compliance with regulatory requirements

  • Loss of customer confidence

    • Competitive Advantages and Market Positioning

    Compliance with BS EN 1015-11 demonstrates a commitment to excellence, which can enhance a companys market position and reputation. Eurolabs expertise in this area enables us to provide valuable services to our clients, who can benefit from improved product quality, reduced risk, and increased competitiveness.

    Cost-Benefit Analysis

    Performing BS EN 1015-11 testing provides several benefits, including:

  • Improved product quality

  • Reduced risk of structural failure

  • Enhanced market position

  • Increased customer confidence

    • The costs associated with performing this test are minimal compared to the long-term benefits. Eurolabs competitive pricing and value proposition make it an attractive option for clients seeking reliable and accurate testing services.

    Why is BS EN 1015-11 Required?

    BS EN 1015-11 is required because:

  • Mortar products are used in critical applications, such as masonry construction.

  • Failure to meet the required strength and durability standards can result in structural failures, injuries, or fatalities.

  • Compliance with regulatory requirements demands that mortar products be tested according to established standards.

    • Business and Technical Reasons for Conducting BS EN 1015-11 Testing

    The business and technical reasons for conducting BS EN 1015-11 testing include:

  • Ensuring product quality and safety

  • Complying with regulatory requirements

  • Reducing risk of structural failure

  • Enhancing market position and reputation

    • Consequences of Not Performing This Test

    Failure to perform BS EN 1015-11 testing can result in reduced product quality, increased risk of structural failure, non-compliance with regulatory requirements, and loss of customer confidence.

    Industries and Sectors

    BS EN 1015-11 applies to various industries, including:

  • Construction

  • Building materials manufacturing

  • Mortar production

  • Masonry construction

    • Risk Factors and Safety Implications

    Failure to comply with BS EN 1015-11 can result in structural failures, injuries, or fatalities. The standard aims to ensure that mortars used for masonry construction meet the required strength and durability standards.

    Quality Assurance and Quality Control

    Compliance with BS EN 1015-11 requires a quality management system (QMS) that ensures consistent testing results and adherence to the standards requirements. Eurolabs QMS is accredited by UKAS (United Kingdom Accreditation Service) to ISO/IEC 17025:2017, which demonstrates our commitment to providing accurate and reliable test results.

    Competitive Advantages and Market Positioning

    Compliance with BS EN 1015-11 demonstrates a commitment to excellence, which can enhance a companys market position and reputation. Eurolabs expertise in this area enables us to provide valuable services to our clients, who can benefit from improved product quality, reduced risk, and increased competitiveness.

    Cost-Benefit Analysis

    Performing BS EN 1015-11 testing provides several benefits, including:

  • Improved product quality

  • Reduced risk of structural failure

  • Enhanced market position

  • Increased customer confidence

    • The costs associated with performing this test are minimal compared to the long-term benefits. Eurolabs competitive pricing and value proposition make it an attractive option for clients seeking reliable and accurate testing services.

    BS EN 1015-11 specifies two test methods:

  • Flexural strength testing: This involves subjecting a test specimen to a bending load until failure occurs.

  • Compressive strength testing: This involves subjecting a test specimen to an axial compressive load until failure occurs.

    • Flexural Strength Testing

    The flexural strength of mortar is determined by subjecting a test specimen to a three-point bending load until failure occurs. The test is conducted in accordance with the standards requirements, including:

  • Specimen preparation

  • Loading and testing

  • Data analysis

    • Compressive Strength Testing

    The compressive strength of mortar is determined by subjecting a test specimen to an axial compressive load until failure occurs. The test is conducted in accordance with the standards requirements, including:

  • Specimen preparation

  • Loading and testing

  • Data analysis

    • Test Equipment and Calibration

    Eurolab uses state-of-the-art equipment, which is calibrated regularly to ensure accurate and reliable test results.

    Interpretation of Test Results

    The interpretation of test results involves analyzing the data obtained from the flexural and compressive strength tests. The standard specifies the requirements for reporting test results, including:

  • Data presentation

  • Calculation of mean and standard deviation values

  • Determination of compliance with specified standards

    • Industries and Sectors

    BS EN 1015-11 applies to various industries, including:

  • Construction

  • Building materials manufacturing

  • Mortar production

  • Masonry construction

    • Risk Factors and Safety Implications

    Failure to comply with BS EN 1015-11 can result in structural failures, injuries, or fatalities. The standard aims to ensure that mortars used for masonry construction meet the required strength and durability standards.

    Quality Assurance and Quality Control

    Compliance with BS EN 1015-11 requires a quality management system (QMS) that ensures consistent testing results and adherence to the standards requirements. Eurolabs QMS is accredited by UKAS (United Kingdom Accreditation Service) to ISO/IEC 17025:2017, which demonstrates our commitment to providing accurate and reliable test results.

    Competitive Advantages and Market Positioning

    Compliance with BS EN 1015-11 demonstrates a commitment to excellence, which can enhance a companys market position and reputation. Eurolabs expertise in this area enables us to provide valuable services to our clients, who can benefit from improved product quality, reduced risk, and increased competitiveness.

    Cost-Benefit Analysis

    Performing BS EN 1015-11 testing provides several benefits, including:

  • Improved product quality

  • Reduced risk of structural failure

  • Enhanced market position

  • Increased customer confidence

    • The costs associated with performing this test are minimal compared to the long-term benefits. Eurolabs competitive pricing and value proposition make it an attractive option for clients seeking reliable and accurate testing services.

    Conclusion

    BS EN 1015-11 is a critical standard that ensures the quality and safety of mortar products used in masonry construction. Compliance with this standard requires a commitment to excellence, which can enhance a companys market position and reputation. Eurolabs expertise in this area enables us to provide valuable services to our clients, who can benefit from improved product quality, reduced risk, and increased competitiveness.

    References

  • BS EN 1015-11:2019 (2019) Test methods for mortar and concrete Part 11: Determination of flexural and compressive strength in the laboratory.

  • ISO/IEC 17025:2017 (2017) General requirements for the competence of testing and calibration laboratories.

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers