EUROLAB
iso-679-determination-of-strength-of-hydraulic-cement
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Methods of Testing Cement – Determination of Strength

Comprehensive Guide to ISO 679 Determination of Strength of Hydraulic Cement Laboratory Testing Service Provided by Eurolab

The determination of the strength of hydraulic cement is a critical parameter in various industries, including construction, infrastructure development, and manufacturing. The standard that governs this testing is ISO 679, which provides guidelines for evaluating the compressive strength of hydraulic cements.

ISO 679 is an international standard developed by the International Organization for Standardization (ISO) to ensure consistency and comparability of test results worldwide. This standard is widely accepted and adopted in many countries, including Europe, North America, Asia, and others. The European Committee for Standardization (CEN), American Society for Testing and Materials (ASTM), Turkish Standards Institution (TSE), and other national standards bodies have also developed their own versions of this standard.

The legal and regulatory framework surrounding this testing service is governed by various laws and regulations in different countries. For example, in the European Union, the Construction Products Regulation (CPR) requires that construction products meet specific performance requirements, including compressive strength. In North America, the American Society for Testing and Materials (ASTM) standards are widely adopted and referenced in building codes and regulations.

Internationally, ISO 679 is widely recognized and respected as a standard for determining the strength of hydraulic cement. The International Electrotechnical Commission (IEC) has also developed a set of guidelines for testing electrical insulation materials, which includes requirements for compressive strength testing.

In terms of national standards, CEN EN 196-1 is an European standard that specifies the method for evaluating the compressive strength of hydraulic cements. ASTM C109/C109M is an American standard that provides guidelines for determining the compressive strength of cement paste and mortar. TSE EN 196-1 is a Turkish standard that adapts the European standard to local conditions.

Standard development organizations, such as ISO, CEN, ASTM, and TSE, play a crucial role in maintaining and updating standards. These organizations collaborate with experts from various industries, governments, and regulatory bodies to ensure that standards remain relevant and effective. The process of standard development involves drafting, review, ballot, and publication.

Standards evolve over time due to advances in technology, changes in regulations, or new requirements from industry stakeholders. For example, ISO 679 was revised in 2017 to include new test methods and requirements for evaluating the compressive strength of hydraulic cements.

In terms of standard compliance requirements, industries such as construction, infrastructure development, manufacturing, and energy production rely on accurate testing results to ensure product safety, quality, and performance. Companies must demonstrate that their products meet specific standards and regulations to access markets, gain customer trust, and comply with regulatory requirements.

The ISO 679 Determination of Strength of Hydraulic Cement laboratory testing service is essential in various industries due to the following reasons:

  • Business and Technical Reasons: The compressive strength of hydraulic cement is a critical parameter in construction, infrastructure development, and manufacturing. Accurate testing results ensure product quality, safety, and performance.

  • Consequences of Not Performing This Test: Failure to perform this test can result in incorrect product specifications, compromised product safety, and non-compliance with regulations.

  • Industries and Sectors: Construction, infrastructure development, manufacturing, energy production, and other industries rely on accurate testing results for their products.

  • Risk Factors and Safety Implications: Incorrect or inaccurate testing results can lead to product failures, accidents, and environmental hazards.

  • Quality Assurance and Quality Control Aspects: The ISO 679 Determination of Strength of Hydraulic Cement laboratory testing service ensures that products meet specific standards and regulations, thereby ensuring quality assurance and control.

  • Competitive Advantages: Companies that demonstrate compliance with standards and regulations gain a competitive advantage in the market.

  • Cost-Benefit Analysis: Performing this test is cost-effective compared to the consequences of not performing it, such as product failures, accidents, and non-compliance with regulations.

    • The ISO 679 Determination of Strength of Hydraulic Cement laboratory testing service involves the following steps:

    1. Sample Preparation: Samples are prepared according to specific requirements, including grinding, mixing, and shaping.

    2. Testing Equipment and Instruments: The test is conducted using specialized equipment, such as a compressive strength testing machine.

    3. Testing Environment Requirements: The testing environment must meet specific conditions, including temperature, humidity, and pressure.

    4. Measurement and Analysis Methods: Test results are measured and analyzed using standardized methods and equipment.

    5. Calibration and Validation Procedures: Equipment is calibrated and validated to ensure accuracy and precision of test results.

    The ISO 679 Determination of Strength of Hydraulic Cement laboratory testing service involves the following reporting and documentation requirements:

    1. Report Content: Reports must include specific information, such as test results, methods used, and any deviations from standard procedures.

    2. Documentation Requirements: Documentation includes records of sample preparation, testing, and analysis, as well as equipment calibration and validation.

    3. Format and Layout: Reports must follow a standardized format and layout to ensure clarity and ease of understanding.

    Conclusion

    In conclusion, the ISO 679 Determination of Strength of Hydraulic Cement laboratory testing service is essential in various industries due to its critical role in ensuring product quality, safety, and performance. Companies that demonstrate compliance with standards and regulations gain a competitive advantage in the market. The process involves sample preparation, testing using specialized equipment, measurement and analysis methods, calibration and validation procedures, and reporting and documentation requirements.

    By understanding the importance of this service and following standardized guidelines, companies can ensure accurate testing results, product safety, and regulatory compliance.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers