EUROLAB
astm-c876-half-cell-potential-of-steel-in-concrete
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

ASTM C876 Half-Cell Potential of Steel in Concrete Laboratory Testing Service: A Comprehensive Guide

Standard-Related Information

The ASTM C876 Half-Cell Potential of Steel in Concrete testing service is governed by various international and national standards, including:

  • ASTM C876: Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete

  • ISO 16763:2014: Reinforced concrete - Measurement of the half-cell potential difference between reinforcing steel and uncoated reinforcement

  • EN 14651:2005: Assessment of the influence of steel corrosion on the durability of reinforced concrete structures - Part 1: General principles for the assessment of steel corrosion in concrete

  • TSE 1170:2013: Reinforced Concrete Structures - Requirements for Durability

    • These standards provide a framework for the testing and evaluation of the half-cell potential difference between reinforcing steel and uncoated reinforcement in concrete. The ASTM C876 standard is widely adopted globally, with many countries having their own national equivalents.

    Standard Development Organizations

    The development of these standards involves various organizations, including:

  • American Society for Testing and Materials (ASTM)

  • International Organization for Standardization (ISO)

  • European Committee for Standardization (CEN)

    • These organizations collaborate to develop, review, and update standards, ensuring they remain relevant and effective. The standard development process typically involves a rigorous technical review, public comment period, and voting by member countries.

    Standard Compliance Requirements

    Compliance with these standards is essential for various industries, including:

  • Construction and building

  • Infrastructure (roads, bridges)

  • Industrial processes (chemical plants, power generation)

    • Non-compliance can result in serious consequences, such as structural failure, reduced lifespan, or even safety hazards. Regular testing and maintenance of reinforced concrete structures are critical to ensure durability and performance.

    Standard Requirements and Needs

    The ASTM C876 Half-Cell Potential of Steel in Concrete testing service is required for several reasons:

  • Structural Integrity: To assess the potential for corrosion-induced damage

  • Durability: To evaluate the long-term performance of reinforced concrete structures

  • Compliance: To meet regulatory requirements for construction and infrastructure projects

  • Risk Assessment: To identify potential risks associated with steel corrosion

    • Consequences of Not Performing This Test

    Failure to conduct this test can lead to:

  • Reduced lifespan of reinforced concrete structures

  • Increased maintenance costs

  • Potential safety hazards due to structural failure

  • Loss of reputation and financial penalties for non-compliance

    • Test Conditions and Methodology

    The ASTM C876 testing service involves the following steps:

    1. Sample Preparation: Collecting representative samples of reinforcing steel and concrete from the structure

    2. Testing Equipment: Using specialized equipment, such as potentiostats and reference electrodes

    3. Measurement Parameters: Measuring half-cell potential difference, resistance, and polarization curves

    4. Calibration and Validation: Ensuring accurate measurements through calibration and validation procedures

    5. Data Analysis: Interpreting test results to assess the risk of steel corrosion

    Test Reporting and Documentation

    The test report includes:

  • Summary of Test Results: Half-cell potential difference, resistance, and polarization curves

  • Interpretation of Test Results: Assessment of steel corrosion risk and recommendations for maintenance or repair

  • Certification and Accreditation: Details on the testing laboratorys accreditation status

    • Why This Test Should Be Performed

    The benefits of conducting the ASTM C876 Half-Cell Potential of Steel in Concrete testing service include:

  • Risk Mitigation: Early detection of potential steel corrosion issues

  • Quality Assurance: Ensuring compliance with regulatory requirements and industry standards

  • Competitive Advantage: Demonstrating commitment to quality and safety

  • Cost Savings: Avoiding costly repairs or replacement of damaged structures

    • Why Eurolab Should Provide This Service

    Eurolab offers:

  • Expertise: Experienced personnel in conducting ASTM C876 testing services

  • State-of-the-Art Equipment: Specialized equipment for accurate measurements

  • Accreditation and Certification: Eurolabs accreditation status ensures compliance with industry standards

  • International Recognition: Eurolabs recognition by international standard development organizations

  • Quality Management Systems: Strict quality control procedures ensure reliable test results

    • Customer Testimonials

    Eurolabs expertise in conducting ASTM C876 testing services has helped us identify potential steel corrosion issues, enabling us to take proactive measures to prevent damage. - XYZ Construction Company

    We rely on Eurolab for all our laboratory testing needs. Their commitment to quality and safety is unmatched. - ABC Infrastructure Project Manager

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers