EUROLAB
iso-1920-4-strength-testing-of-concrete-part-4-strength-by-compression
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

ISO 1920-4 Strength Testing of Concrete Part 4: Strength by Compression Laboratory Testing Service Provided by Eurolab

Introduction

The strength testing of concrete is a critical aspect of the construction industry, ensuring that concrete structures can withstand various loads and stresses. ISO 1920-4 is an international standard that specifies the requirements for strength testing of concrete by compression. In this article, we will provide comprehensive information about the relevant standards governing this testing service, including the legal and regulatory framework, international and national standards, standard development organizations, and standard compliance requirements.

Legal and Regulatory Framework

The construction industry is heavily regulated, with various laws and regulations governing the use of concrete in structures. In many countries, there are specific building codes and regulations that require concrete to meet certain strength requirements. For example, the International Building Code (IBC) requires concrete to have a minimum compressive strength of 2500 psi (17 MPa) for certain applications.

International and National Standards

The ISO 1920-4 standard is an international standard developed by the International Organization for Standardization (ISO). However, there are also national standards that govern concrete testing in specific countries. For example, the American Society for Testing and Materials (ASTM) C39/C39M standard specifies the requirements for compressive strength testing of concrete in the United States.

Standard Development Organizations

Standard development organizations play a crucial role in developing and maintaining standards for the construction industry. The ISO, ASTM, and European Committee for Standardization (CEN) are some of the prominent standard development organizations involved in developing standards for concrete testing.

Evolution of Standards

Standards evolve over time to reflect changes in technology, materials, and regulatory requirements. For example, the ISO 1920-4 standard was revised in 2016 to incorporate new test methods and equipment. Standard development organizations continuously review and update existing standards to ensure they remain relevant and effective.

Standard Numbers and Scope

The following are some of the key standard numbers and their scope:

  • ISO 1920-4: Strength Testing of Concrete Part 4: Strength by Compression

  • ASTM C39/C39M: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

  • EN 12390-3: Testing Hardened Concrete Part 3: Compressive Strength of Hardened Concrete

    • Standard Compliance Requirements

    Concrete testing is required for various industries, including construction, infrastructure development, and materials manufacturing. Compliance with standards ensures that concrete structures meet safety and performance requirements.

    Why this Specific Test is Needed and Required

    The strength testing of concrete by compression is essential to ensure the durability and safety of concrete structures. This test is particularly important in high-rise buildings, bridges, and other critical infrastructure projects where structural integrity is paramount.

    Introduction

    This section will explain why ISO 1920-4 Strength Testing of Concrete Part 4: Strength by Compression testing is needed and required. We will discuss the business and technical reasons for conducting this test, consequences of not performing it, industries that require it, risk factors and safety implications, quality assurance and control aspects, contribution to product safety and reliability, competitive advantages, cost-benefit analysis, and more.

    Business and Technical Reasons

    The concrete testing industry is highly competitive, with many laboratories offering similar services. However, only those labs that offer accurate and reliable results can differentiate themselves from the competition. The ISO 1920-4 standard provides a framework for conducting strength testing of concrete by compression, ensuring consistency and accuracy in test results.

    Consequences of Not Performing this Test

    Failure to perform ISO 1920-4 Strength Testing of Concrete Part 4: Strength by Compression testing can result in structural failure, accidents, and financial losses. Inadequate or inaccurate test results can lead to costly rework, delays, and disputes between contractors and clients.

    Industries that Require this Testing

    This testing is required for various industries, including:

  • Construction

  • Infrastructure development (bridges, roads, etc.)

  • Materials manufacturing (cement, aggregates, etc.)

  • Concrete production

    • Risk Factors and Safety Implications

    The strength testing of concrete by compression involves risks associated with equipment failure, sample preparation errors, and inaccurate test results. Eurolab takes all necessary precautions to ensure the safety of our personnel and the quality of our test results.

    Quality Assurance and Control Aspects

    Eurolab is committed to providing accurate and reliable test results through a robust quality management system (QMS) that ensures consistency, accuracy, and reliability in testing services.

    Contribution to Product Safety and Reliability

    The ISO 1920-4 standard contributes significantly to product safety and reliability by ensuring that concrete structures meet specified strength requirements. This reduces the risk of structural failure, accidents, and financial losses associated with inadequate or inaccurate test results.

    Competitive Advantages

    Eurolabs commitment to quality, consistency, and accuracy in test results provides a competitive advantage over other laboratories offering similar services.

    Cost-Benefit Analysis

    While conducting ISO 1920-4 Strength Testing of Concrete Part 4: Strength by Compression testing may seem costly, it is essential for ensuring the safety and reliability of concrete structures. Inadequate or inaccurate test results can lead to costly rework, delays, and disputes between contractors and clients.

    Quality Management System

    Eurolabs QMS ensures consistency, accuracy, and reliability in testing services by:

  • Establishing clear procedures for sample preparation, equipment calibration, and testing

  • Implementing a rigorous quality control process to ensure test results meet specified requirements

  • Maintaining accurate records of testing activities and results

    • Personnel Training

    Eurolabs personnel are trained to conduct ISO 1920-4 Strength Testing of Concrete Part 4: Strength by Compression testing according to the standard, ensuring that they understand the procedures and equipment involved.

    Equipment Calibration

    Eurolab ensures that all equipment used for strength testing of concrete by compression is calibrated regularly to ensure accuracy and consistency in test results.

    ...

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers