EUROLAB
en-13039-siliceous-sand-for-concrete
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

Comprehensive Guide to EN 13039 Siliceous Sand for Concrete Laboratory Testing Service by Eurolab

EN 13039 Siliceous Sand for Concrete is a European standard that governs the testing and evaluation of siliceous sand used in concrete production. This standard is published by the European Committee for Standardization (CEN) and is based on international standards such as ISO 679-1 and ASTM C33.

1.1 Legal and Regulatory Framework

The legal and regulatory framework surrounding EN 13039 Siliceous Sand for Concrete testing is governed by various national and international laws, regulations, and guidelines. These include:

  • EU Directives (e.g., EC 305/2008)

  • National building codes (e.g., Eurocode 2)

  • Industry-specific standards (e.g., ISO 679-1, ASTM C33)

    • 1.2 Standard Development Organizations

    Standard development organizations such as the European Committee for Standardization (CEN), International Organization for Standardization (ISO), and American Society for Testing and Materials (ASTM) play a crucial role in developing and updating standards.

    1.3 Standard Evolution and Update

    Standards evolve over time due to advances in technology, changes in regulatory requirements, or new research findings. Eurolab stays up-to-date with the latest standard developments through continuous training and professional development of its staff.

    1.4 Specific Standard Numbers and Scope

    The scope of EN 13039 Siliceous Sand for Concrete testing includes:

  • Determination of sand properties (e.g., particle size distribution, density)

  • Assessment of sand suitability for concrete production

    • Key standard numbers include:

  • EN 13039:2009A2:2017

  • ISO 679-1:2009

  • ASTM C33/C33M-18

    • 1.5 Standard Compliance Requirements

    Standard compliance is essential for industries such as construction, infrastructure development, and materials science. Eurolab helps ensure that customers meet standard requirements through our comprehensive testing services.

    EN 13039 Siliceous Sand for Concrete testing is crucial in ensuring the quality and performance of concrete products. This test provides valuable information on sand properties, which affects the final products strength, durability, and sustainability.

    2.1 Business and Technical Reasons

    The business and technical reasons for conducting EN 13039 Siliceous Sand for Concrete testing include:

  • Ensuring compliance with national and international standards

  • Optimizing concrete mix design and production processes

  • Improving product quality and performance

  • Reducing the risk of construction defects or failures

    • 2.2 Consequences of Not Performing This Test

    Failure to perform EN 13039 Siliceous Sand for Concrete testing can lead to:

  • Non-compliance with regulatory requirements

  • Reduced concrete durability and lifespan

  • Increased risk of construction defects or failures

  • Economic losses due to rework, repairs, or replacements

    • 2.3 Industries and Sectors

    EN 13039 Siliceous Sand for Concrete testing is essential for various industries, including:

  • Construction (residential, commercial, industrial)

  • Infrastructure development (roads, bridges, airports)

  • Materials science

  • Civil engineering

    • 2.4 Risk Factors and Safety Implications

    The risk factors associated with EN 13039 Siliceous Sand for Concrete testing include:

  • Material failure or defects due to inadequate sand properties

  • Construction accidents or injuries resulting from poor concrete quality

  • Environmental pollution due to incorrect waste management

    • EN 13039 Siliceous Sand for Concrete testing involves a series of steps and procedures to determine the sands properties.

    3.1 Testing Equipment and Instruments

    Eurolab uses state-of-the-art equipment and instruments, including:

  • Particle size analyzers

  • Density meters

  • Balance scales

  • Vibration tables

    • 3.2 Testing Environment Requirements

    The testing environment must meet specific requirements, such as temperature (20-25C), humidity (50-60), and pressure (1013 mbar).

    3.3 Sample Preparation Procedures

    Sample preparation involves:

  • Collecting representative sand samples from the supplier

  • Grading and sieving the samples to ensure uniformity

    • 3.4 Testing Parameters and Conditions

    The testing parameters include:

  • Particle size distribution (PSD)

  • Density

  • Water absorption

  • Specific gravity

    • 3.5 Measurement and Analysis Methods

    Eurolab uses various measurement and analysis methods, including:

  • Spectroscopy

  • Chromatography

  • Statistical analysis software

    • 3.6 Calibration and Validation Procedures

    Calibration and validation procedures ensure the accuracy and reliability of test results.

    EN 13039 Siliceous Sand for Concrete testing requires comprehensive reporting and documentation, including:

    4.1 Report Format and Content

    Eurolabs reports include:

  • Summary of test methods and procedures

  • Results and data analysis

  • Conclusion and recommendations

    • 5. Conclusion

    In conclusion, EN 13039 Siliceous Sand for Concrete testing is a critical step in ensuring the quality and performance of concrete products. Eurolab provides comprehensive testing services to help customers meet standard requirements and improve their business operations.

    ---

    This comprehensive guide has provided an overview of the importance of EN 13039 Siliceous Sand for Concrete laboratory testing, including its standard-related information, requirements, and methodology. By understanding these key aspects, you can make informed decisions about your concrete products and ensure compliance with regulatory requirements.

    Contact Eurolab today to learn more about our comprehensive testing services and how we can help you improve the quality and performance of your concrete products.

    ---

    Eurolabs Testing Services

  • Particle size distribution analysis

  • Density measurements

  • Water absorption testing

  • Specific gravity determination

    • Why Choose Eurolab?

  • State-of-the-art equipment and instruments

  • Experienced and trained staff

  • Fast turnaround times and competitive pricing

  • Comprehensive reporting and documentation

    • ---

    Contact Us:

    Email: infoeurolab.com(mailto:infoeurolab.com)

    Phone: 1 (800) 123-4567

    Address: Eurolab Testing Services, 123 Main St, Anytown, USA

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers