EUROLAB
aci-214-guide-for-evaluation-of-strength-test-results
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 13670 Execution of Concrete StructuresEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

ACI 214 Guide for Evaluation of Strength Test Results Laboratory Testing Service

Provided by Eurolab: Understanding the Benefits and Requirements

Standard-Related Information

The ACI 214 Guide for Evaluation of Strength Test Results is a widely accepted standard in the construction industry, which outlines the procedures for evaluating the strength test results of concrete materials. This guide is developed and published by the American Concrete Institute (ACI), a leading technical society for concrete-related research, development, and education.

International Standards:

  • ISO 6707-1:2005 - Building materials - Sampling from construction sites

  • ASTM C42/C42M-18 - Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

  • EN 12350-4:2019 - Ready-mixed concrete - Sampling, testing, and evaluation - Part 4: Determination of slump flow

  • TSE 625:2007 - Ready-mixed concrete - Specifications

    • National Standards:

  • ASTM C157/C157M-19 - Standard Test Method for Compressive Strength of Concrete in the Field

  • EN 12350-5:2019 - Ready-mixed concrete - Sampling, testing, and evaluation - Part 5: Determination of workability using slump test

    • Standard Development Organizations:

    The American Concrete Institute (ACI) is a leading technical society for concrete-related research, development, and education. ACI develops and publishes standards, guides, and specifications for the design, construction, and maintenance of concrete structures.

    International and National Standards Evolution:

    Standards evolve over time to reflect changes in technology, materials, and industry practices. New editions of standards are published periodically to incorporate updates, revisions, or new requirements. It is essential for laboratories to stay up-to-date with the latest standards and guidelines to ensure compliance and quality.

    Standard Compliance Requirements:

    Compliance with relevant standards is mandatory for industries that require concrete testing services. Failure to comply can result in project delays, cost overruns, or even construction site shutdowns. Eurolab ensures that all testing services are conducted in accordance with applicable standards and regulations.

    Industry-Specific Examples and Case Studies:

  • Construction of high-rise buildings

  • Infrastructure development (roads, bridges, tunnels)

  • Industrial projects (power plants, chemical facilities)

    • Statistical Data and Research Findings:

    Studies have shown that concrete strength testing is critical to ensuring the structural integrity and durability of concrete structures. Inadequate or inaccurate testing can lead to costly repairs, safety risks, or even catastrophic failures.

    Standard-Related Information Conclusion:

    The ACI 214 Guide for Evaluation of Strength Test Results is a widely accepted standard in the construction industry. Eurolab ensures that all testing services are conducted in accordance with applicable standards and regulations to guarantee quality, accuracy, and compliance.

    ---

    Standard Requirements and Needs

    Business and Technical Reasons:

    Concrete strength testing is essential for ensuring the structural integrity and durability of concrete structures. The consequences of inadequate or inaccurate testing can be severe, including:

  • Project delays

  • Cost overruns

  • Construction site shutdowns

  • Safety risks

    • Industries and Sectors that Require This Testing:

  • Construction industry (building, infrastructure, industrial projects)

  • Transportation sector (roads, bridges, tunnels)

  • Energy sector (power plants, chemical facilities)

    • Risk Factors and Safety Implications:

    Inadequate or inaccurate concrete strength testing can lead to:

  • Structural failures

  • Collapses

  • Injuries or fatalities

  • Environmental damage

    • Quality Assurance and Quality Control Aspects:

    Eurolab ensures that all testing services are conducted in accordance with applicable standards and regulations, ensuring quality, accuracy, and compliance.

    ---

    Test Conditions and Methodology

    Step-by-Step Explanation of the Test:

    1. Sample preparation

    2. Testing equipment setup

    3. Testing environment control (temperature, humidity)

    4. Data collection and recording

    Testing Equipment and Instruments Used:

  • Compression testing machine

  • Concrete testing mold

  • Measuring instruments (calipers, gauges)

    • Sample Preparation Procedures:

  • Sampling from construction sites or production facilities

  • Sample preparation (coring, sawing)

    • Testing Parameters and Conditions:

  • Compressive strength

  • Slump test

  • Workability

    • Measurement and Analysis Methods:

  • Data collection using testing equipment

  • Calculation of compressive strength

  • Statistical analysis of results

    • Calibration and Validation Procedures:

  • Regular calibration of testing equipment

  • Validation of testing methods against standards

    • Quality Control Measures During Testing:

  • Operator training and certification

  • Equipment maintenance and calibration

  • Data validation and verification

    • ---

    Test Reporting and Documentation

    Reporting Standards and Formats:

  • Eurolab reports are structured according to international and national standards (ISO, ASTM, EN)

  • Reports include:

    • Test results

    Methodology used

    Equipment calibration records

    Operator certification documents

    Data Validation and Verification:

    Eurolab ensures that all data is validated and verified before reporting.

    ---

    This comprehensive guide provides a detailed understanding of the ACI 214 Guide for Evaluation of Strength Test Results laboratory testing service provided by Eurolab. From standard-related information to test conditions and methodology, this guide covers essential aspects of concrete strength testing. Eurolabs commitment to quality, accuracy, and compliance ensures that customers receive reliable results, meeting industry standards and regulations.

    ---

    Industry-Specific Applications:

  • Building construction (residential, commercial)

  • Infrastructure development (roads, bridges, tunnels)

  • Industrial projects (power plants, chemical facilities)

    • Benefits of Using Eurolabs Services:

  • Compliance with international and national standards

  • Quality assurance and quality control

  • Timely reporting and documentation

    • ---

    Conclusion:

    Eurolab provides a comprehensive laboratory testing service for concrete strength evaluation, ensuring compliance with industry standards and regulations. Our commitment to quality, accuracy, and customer satisfaction ensures that customers receive reliable results, meeting their project requirements.

    ---

    This guide provides a detailed understanding of the ACI 214 Guide for Evaluation of Strength Test Results laboratory testing service provided by Eurolab.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers