EUROLAB
en-13670-execution-of-concrete-structures
Concrete and Mortar Testing AASHTO T112 Density of AggregateAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of CylindersAASHTO T119 Compressive Strength of Cylindrical Concrete SpecimensAASHTO T161 Length Change of Hardened ConcreteAASHTO T22 Slump Test for Fresh ConcreteAASHTO T23 Air Content of Freshly Mixed Concrete by Pressure MethodAASHTO T24 Air Content of Hydraulic Cement Concrete by Pressure MethodAASHTO T71 Sampling and Testing of AggregateAASHTO T97 Compression Testing of ConcreteAASHTO T97 Compressive Strength of CylindersACI 209 Prediction of Creep, Shrinkage, and Temperature EffectsACI 211 Guide for Concrete Mixture ProportioningACI 214 Guide for Evaluation of Strength Test ResultsACI 234 Guide for Concrete DurabilityACI 301 Specifications for Structural ConcreteACI 318 Building Code Requirements for Structural ConcreteACI 318 Structural Concrete Code RequirementsACI 522 Guide for Fiber-Reinforced ConcreteACI 544 Fiber Reinforcement TestingASTM C1064 Temperature of Freshly Mixed Hydraulic-Cement ConcreteASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1077 Standard Practice for Laboratories Testing ConcreteASTM C109 Compressive Strength of Hydraulic Cement MortarsASTM C109M Compressive Strength of Hydraulic Cement MortarsASTM C114 Chemical Analysis of Hydraulic CementASTM C1152 Acid Soluble Chloride in Concrete and Concrete Raw MaterialsASTM C1157 Performance Specification for Hydraulic CementASTM C1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion PenetrationASTM C1231 Structural Testing of Drilled Concrete CoresASTM C1237 Flow of Mortar Using a Flow TableASTM C1240 Testing for Air-Entraining AdmixturesASTM C1260 Accelerated Mortar Bar Test for Alkali-Silica ReactionASTM C138 Unit Weight, Yield, and Air Content of ConcreteASTM C140 Density, Yield, and Air Content of MortarASTM C143 Slump of Hydraulic-Cement ConcreteASTM C143 Slump of Hydraulic-Cement ConcreteASTM C1512 Restrained Expansion of Mortar Bars Due to ASRASTM C156 Air Content in Freshly Mixed Concrete by Volumetric MethodASTM C157 Length Change of Hardened ConcreteASTM C157 Length Change of Hardened ConcreteASTM C1576 Testing Mortars for Air ContentASTM C1579 Early Age Shrinkage of Cementitious Mixtures Using Embedded Strain GaugesASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic Cement ConcreteASTM C1602 Mixing Water for ConcreteASTM C1609 Flexural Performance of Fiber-Reinforced ConcreteASTM C1679 Method for Measuring Early-Age Shrinkage of Cementitious MixturesASTM C171 Sampling Fresh ConcreteASTM C185 Determination of Carbonation DepthASTM C185 Determination of Carbonation Depth in ConcreteASTM C185 Measurement of Setting Time of Hydraulic CementASTM C231 Air Content in Freshly Mixed Concrete by Pressure MethodASTM C231 Air Content of Freshly Mixed Concrete by Pressure MethodASTM C266 Time of Setting of Concrete Mixtures by Penetration ResistanceASTM C293 Flexural Strength of ConcreteASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Flexural Strength of Concrete Using Simple Beam with Third-Point LoadingASTM C293 Testing Concrete Beam Flexural StrengthASTM C31 Making and Curing Concrete Test SpecimensASTM C349 Compressive Strength of Hydraulic Cement MortarsASTM C39 Compressive Strength Testing of Concrete CylindersASTM C42 Obtaining and Testing Drilled Cores and Sawed BeamsASTM C469 Modulus of Elasticity and Poisson’s Ratio in ConcreteASTM C469 Static Modulus of Elasticity and Poisson’s Ratio of Concrete in CompressionASTM C494 Chemical Admixtures for ConcreteASTM C642 Density, Absorption, and Voids in Hardened ConcreteASTM C666 Resistance of Concrete to Rapid Freezing and ThawingASTM C78 Flexural Strength of ConcreteASTM C78 Flexural Strength of Concrete BeamsASTM C805 Rebound Number of Hardened ConcreteASTM C876 Half-Cell Potential of Steel in ConcreteBS 1881-121 Determination of Water Absorption of Hardened ConcreteBS 1881-203 Testing for Compressive StrengthBS 1881-208 Testing for Flexural StrengthBS 4550 Specification for Concrete TestingBS 4551 Testing of Concrete – Methods for Strength and DensityBS 812 Testing AggregatesBS 8500-1 Concrete – Part 1: Specification for Constituent MaterialsBS 8500-2 Concrete – Part 2: Specification for ConcreteBS EN 1015-11 Determination of Flexural and Compressive Strength of MortarBS EN 197-1 Cement StandardsBS EN 206 Specification for ConcreteBS EN 480-11 Admixtures for Concrete – Testing MethodsBS EN 934-2 Concrete AdmixturesEN 12390-10 Determination of Chloride Content in Hardened ConcreteEN 12390-2 Making and Curing Specimens for Strength TestsEN 12390-3 Compressive Strength of Test SpecimensEN 12390-5 Flexural Strength of Test SpecimensEN 12390-6 Tensile Splitting Strength of Test SpecimensEN 12390-7 Density of Hardened ConcreteEN 12390-8 Depth of Penetration of Water Under PressureEN 12620 Aggregates for ConcreteEN 12620 Aggregates for ConcreteEN 13039 Siliceous Sand for ConcreteEN 13055 Lightweight AggregatesEN 13286-47 Test Methods for Unbound and Hydraulically Bound MixturesEN 196-1 Determination of StrengthEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 197-1 Cement Composition and SpecificationsEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 206-1 Concrete Specification, Performance, Production and ConformityISO 14001 Environmental Management in Concrete ProductionISO 15686-2 Service Life Planning of Concrete StructuresISO 1920-1 Sampling of Hardened ConcreteISO 1920-3 Sampling Fresh ConcreteISO 1920-4 Strength Testing of Concrete – Part 4: Strength by CompressionISO 1920-5 Determination of Tensile Splitting StrengthISO 1920-6 Flexural Strength Testing of ConcreteISO 1920-7 Determination of Density of Hardened ConcreteISO 1920-8 Determination of Water Absorption of Hardened ConcreteISO 1920-9 Determination of Freeze-Thaw ResistanceISO 21930 Sustainability in Building ConstructionISO 22112 Concrete Testing – Durability TestingISO 679 Determination of Strength of Hydraulic CementISO 679 Methods of Testing Cement – Determination of Strength

Comprehensive Guide to EN 13670 Execution of Concrete Structures Laboratory Testing Service by Eurolab

Standard-Related Information

EN 13670 is a European Standard that outlines the requirements for the execution of concrete structures. This standard is part of the Eurocode series, which provides harmonized technical rules for the design and construction of buildings and other civil engineering works.

Relevant Standards

The following standards are relevant to EN 13670:

  • EN 1992: Design of concrete structures

  • EN 206: Concrete - Specification, properties, manufacture and conformity

  • ISO 9001: Quality management systems

  • ASTM C94/C94M-19: Standard specification for ready-mixed concrete

  • TSE 802: Turkish standard for execution of concrete structures

    • International and National Standards

    EN 13670 is a national application document (NAD) of the Eurocode series, which means it is based on international standards such as EN 1992 and ISO 9001. The standard is applicable to the execution of concrete structures in buildings and civil engineering works.

    Standard Development Organizations

    The European Committee for Standardization (CEN) is responsible for the development and maintenance of EN 13670. CEN is a non-profit organization that brings together experts from industry, research, and government to develop and maintain technical standards.

    Evolution of Standards

    Standards evolve over time to reflect new technologies, materials, and construction methods. EN 13670 has undergone several revisions since its first publication in 2009.

    Standard Numbers and Scope

    The following are the standard numbers and scope of EN 13670:

  • EN 13670:2015 Execution of concrete structures - Code of practice for design and execution

  • EN 13670:2015/A1:2020 Amendments to the code of practice

    • Compliance Requirements

    EN 13670 is applicable to all types of concrete structures, including buildings, bridges, and industrial facilities. Compliance with this standard is mandatory for contractors and suppliers working on public or private projects.

    Standard-Related Industries

    The following industries require compliance with EN 13670:

  • Construction

  • Civil engineering

  • Infrastructure development

  • Building management

    • Consequences of Non-Compliance

    Non-compliance with EN 13670 can result in structural failures, safety risks, and legal liabilities for contractors and suppliers.

    ---

    Standard Requirements and Needs

    Why is this test needed and required?

    EN 13670 testing is necessary to ensure the quality and durability of concrete structures. This test helps to:

  • Verify compliance with design specifications

  • Detect defects or weaknesses in the structure

  • Ensure structural safety and integrity

    • Business and Technical Reasons for Testing

    Testing according to EN 13670 provides several business and technical benefits, including:

  • Improved product quality and reliability

  • Reduced construction costs and delays

  • Enhanced customer satisfaction and trust

  • Compliance with regulatory requirements

    • Risk Factors and Safety Implications

    Non-compliance with EN 13670 can result in safety risks, such as structural failures, accidents, and injuries.

    Quality Assurance and Quality Control Aspects

    EN 13670 testing involves several quality assurance and control measures, including:

  • Sample preparation and testing

  • Equipment calibration and validation

  • Data collection and analysis

    • Contributing to Product Safety and Reliability

    EN 13670 testing contributes to product safety and reliability by ensuring that concrete structures meet the required standards.

    ---

    Test Conditions and Methodology

    Conducting the Test

    The test is conducted in accordance with EN 13670, which specifies the following steps:

    1. Sample preparation

    2. Testing equipment calibration and validation

    3. Data collection and analysis

    Testing Equipment and Instruments

    The testing equipment used includes:

  • Concrete compressive strength machines

  • Ultrasonic devices for concrete testing

  • Microscopes for defect detection

    • Testing Environment Requirements

    The testing environment requires a controlled temperature (20C 5C) and humidity (50 10) level.

    ---

    Test Reporting and Documentation

    Reporting Test Results

    Test results are documented in accordance with EN 13670, which specifies the following report format:

    1. Introduction

    2. Sample preparation and testing methods

    3. Test results and analysis

    Interpretation of Test Results

    The interpretation of test results is based on the standards requirements for concrete structures.

    Certification and Accreditation Aspects

    EN 13670 testing involves certification and accreditation aspects, including:

  • Calibration and validation of testing equipment

  • Sample preparation and testing procedures

  • Data collection and analysis

    • ---

    Why This Test Should be Performed

    Benefits and Advantages

    Performing EN 13670 testing provides several benefits and advantages, including:

  • Improved product quality and reliability

  • Reduced construction costs and delays

  • Enhanced customer satisfaction and trust

  • Compliance with regulatory requirements

    • Risk Assessment and Mitigation

    EN 13670 testing helps to mitigate risks associated with structural failures and safety hazards.

    Quality Assurance and Compliance Benefits

    Testing according to EN 13670 provides several quality assurance and compliance benefits, including:

  • Verification of design specifications

  • Detection of defects or weaknesses in the structure

  • Ensuring structural safety and integrity

    • ---

    Why Choose Eurolab?

    Eurolab is a leading testing laboratory specializing in concrete structures. Our experienced technicians and state-of-the-art equipment ensure accurate and reliable results.

    Contact Us

    For more information about our EN 13670 testing services, please contact us at:

    Phone: 90 312 418 14 01

    Email: infoeurolab.com.tr(mailto:infoeurolab.com.tr)

    Address: Ankara, Turkey

    We look forward to serving you!

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers